Installation Requirements for Heat Exchanger Fin Tube

Installation requirements for Heat Exchanger Fin Tube
The installation of the fin-tube heat exchanger is an important part. Before installation, we must carry out on-site measurements to determine the model, number of pieces and detailed installation orientation of the fin-tube heat exchanger. Various accessories for installation. The pre-installation includes the positioning of heating equipment, slotting, piping, pipe connection, installation of water collectors, suppression testing, etc. The later installation includes the installation of the fin-tube heat exchanger, fixed suspension, the connection of the valve and the fin-tube heat exchanger and the heating pipe, the pressure test of the entire system and the commissioning of the fin-tube heat exchanger.
Installation requirements for Heat Exchanger Fin Tube
Pay attention to the installation and construction process, before or after the construction of water and electricity, it should be carried out before the construction of other decoration procedures. If the heating is installed before decoration, then the branch pipe connecting the heating main pipe and the Heat Exchanger Fin Tube should be buried under the floor and in the wall, and the pipe should not be leaked outside to prevent damage.
For the finned tube at the selected time, the number of slices, the width of each slice, the distance between the slices, the method of water inflow, and the distance of the interface should be accurate to prevent affecting the installation of the Heat Exchanger Fin Tube in the later stage.
Finned tube radiator is a kind of heat exchange equipment widely used in gas and liquid heat exchangers. It achieves the purpose of enhancing heat transfer by adding fins to the ordinary base tube. The base pipe can be steel pipe; stainless steel pipe; copper pipe and so on. The fins can also be made of steel belt; stainless steel belt, copper belt, aluminum belt and so on.
1. The particularity of finned tube radiator Heating radiator, as a building part, is different from ordinary furniture. Its particularity is that it is also a hot water pressure vessel, and there is a risk of (corrosion) leakage. Therefore, the owner must have a certain sense of risk when choosing a radiator when decorating a house, and treat it with caution.
2. The finned tube heat exchanger should be matched with the heating system. The water quality characteristics of the southern region determine the choice of radiators with strong corrosion resistance or new radiators as much as possible. The service life of these two radiators can reach 25 years and 50 years. above. The radiator has the advantages of large water storage, good heat dissipation effect, light weight, high pressure bearing, beautiful spray surface and reasonable price, and it is more worthy of users to recommend.
3. Consider the material of the Heat Exchanger Fin Tube because the material determines its heating performance, safety, reliability and life span. In terms of heat dissipation performance, it is pure aluminum, followed by steel, and again.
4. The factors of the water supply pipeline of the Heat Exchanger Fin Tube. Because the finned tube heat exchanger always stores water during the heating season, safety is very important. When purchasing fin-tube radiators and accessories, consumers should choose large-scale building materials supermarkets or specialty stores, and install them by professionals from the fin-tube radiator manufacturer or sales shop. Otherwise, the fin-tube radiator will cause major losses if the fin-tube radiator leaks. . Any cold heat exchanger that is equipped with fins on the heat exchange tube to increase the heat dissipation area can be summarized as a "finned tube heat exchanger". Heat Exchanger Fin Tube can be divided into winding fin type; string fin type; welding fin type; rolled fin type according to the structure of the fin.