Stainless Steel 304 Laser Welding Helical Finned Tube High Performance: The use of the laser technique for the welding of finned tubes offers a number of advantages due to the ability of the beam to be very accurately focused, allowing full use of the beam’s high thermal capacity. Finned tubes are produced in cooper and copper alloys by helically winding a strip onto the tube ans simultaneously soldering both with tin solder.
Read MoreSend InquiryEmbedded Fluted Carbon Steel Seamless Single Row Flat Fin Tube 0.5mm thickness: The common application fields are: Heat exchangers units for power plant(electric, nuclear, thermal and geothermal power plants); High corrosive systems (condensers, evaporators, sea water desalinations, fertilizing, urea systems, ammonia, gas, corrosive acids); The petroleum, chemical and petrochemical industries; The food processing and refrigeration industries; Natural gas treatment.
Read MoreSend InquiryTension Wound Single Row Flat Fin Tube For Air Cooled Condenser: The fin strip (normally aluminum and copper) is folded into an L SHAPE and wound onto the base tube surface under tension. The feet of the fins are joined together and cover the finned surface.
Read MoreSend InquiryRound Extruded Aluminum Heat Sink Profile With Small Longitudinal Fins: It has a thermal conductivity of 205W/mK, which is good (as a comparison: steel has about 50W/mK). The production of aluminum heat sinks is inexpensive. They can be made using extrusion. Due to its softness, aluminum can also be milled quickly; die-casting and even cold forging are also possible. Aluminum is also very light (thus, an aluminum heat sink will put less stress on its mounting when the unit is moved around).
Read MoreSend InquiryElliptical Carbon Steel Finned Tubes for Air Preheater / Heat Exchanger: It has a thermal conductivity of 205W/mK, which is good (as a comparison: steel has about 50W/mK). The production of aluminum heat sinks is inexpensive. They can be made using extrusion. Due to its softness, aluminum can also be milled quickly; die-casting and even cold forging are also possible. Aluminum is also very light (thus, an aluminum heat sink will put less stress on its mounting when the unit is moved around).
Read MoreSend Inquiry